Home > news > Content

Performance introduction and main technical parameters of J58B series electric screw press

J58B series electric screw press is a new generation electric screw press independently developed by Qingdao Yiyou Forging Machinery Co., Ltd. It is a forging equipment with strong process applicability. It can be used for both hot forging and precision forging and finishing. The press is driven by a switched reluctance motor. It is controlled by PLC and equipped with Taiwan programmable panel. It has two kinds of striking energy adjustable. The striking force can be adjusted by the potentiometer on the panel. The striking force and striking energy can be adjusted according to the forming precision. To reduce the mechanical stress and thermal contact time of the mold and extend the life of the mold. While inheriting the advantages of the previous generation of electric screw presses, it has the outstanding advantages of simple structure, convenient operation, fast speed, less failure and low cost of use. This model is also suitable for the transformation of traditional presses, thus providing a better choice for the low-cost development of enterprises.

1. Advanced drive system

It can realize digital control, with soft start function, small starting current, high power factor, wide motor speed regulation range, and frequent forward and reverse rotation.

2, advanced lubrication system

The lubrication of the screw and the copper nut can be fully guaranteed, thereby extending the service life of the device.

3. Advanced control system

The potentiometer can be used to adjust the speed of the motor infinitely, so that the impact force of the press can be precisely controlled.

4. Advanced braking system

The press uses a platen brake system to make the brakes sensitive and reliable.

J58B series electric screw press technical parameters
Qingdao Haoyuan Yiyou Forging Machinery Co., Ltd.
model Nominal force (kn) Maximum pressure (kn) Moving part energy (kj) Slider stroke (mm) Number of trips (per min) Workbench size (mm) Minimum mold height (mm) Motor power (kw)
J58B-300 3000 5000 16 360 30 800*670 320 37
J58B-400 4000 6000 40 500 30 820*730 400 55
J58B-630 6300 9500 65 600 30 920*820 470 90
J58B-1000 10000 15000 130 700 30 1200*1000 500 132
J58B-1600 16000 32000 235 700 30 1250*1100 550 132*2